Softshell with TPU Membrane and Sublimation Print — Production and Personalisation

Softshell with a TPU membrane and sublimation print is a technical fabric designed for the production of outdoor clothing, sportswear, workwear, promotional apparel and functional accessories. It combines protection against moisture and wind, breathability, flexibility and the possibility of applying a custom print to the outer layer of the fabric.

The fabric has a width of 150 cm +/- 5 cm, a weight of approximately 300 g/m² and a composition based on polyester, 6% elastane and a TPU membrane. Thanks to this construction, the softshell is flexible, resistant to deformation, waterproof and breathable, while also being suitable for personalisation using sublimation printing.

Technical parameters such as water resistance WR > 8,000 H₂O and breathability WVP > 3,000 g/m²/24h make this fabric suitable for products intended for outdoor activity, corporate clothing, workwear, outdoor accessories and private label collections.

Personalisation options

We can print softshell with a TPU membrane according to the customer’s individual design, depending on the intended use of the product, type of collection, expected visual effect and functional requirements.

Personalisation options include:

• printing any customer-supplied artwork,
• printing a logo, brand name, company markings or collection motif,
• printing repeat patterns,
• full-surface printing on the outer layer,
• preparing the fabric for jackets, hoodies, vests, trousers and accessories,
• the possibility of producing corporate, workwear, sports, promotional and outdoor clothing,
• the possibility of preparing seasonal, technical, promotional and limited collections,
• printing graphics, patterns, logos, outdoor motifs and functional markings,
• production of prototypes, short runs and larger production orders,
• the possibility of private label production.

Thanks to personalisation, the fabric can be adapted to the visual identity of a brand, company, team, store, outdoor collection, workwear range or specific technical product.

Custom artwork printing

We can apply sublimation printing to the outer layer of the softshell according to the customer’s design. This may include a logo, company graphic, outdoor pattern, sports print, advertising design, technical markings, collection motif or full-surface artwork prepared for a specific cut or product.

The option of printing allows the fabric to serve several functions at the same time:

• a base for outdoor clothing,
• a fabric for workwear and corporate clothing,
• a component for sports collections,
• a carrier of brand visual identity,
• a material for promotional products,
• a base for technical accessories,
• a component for limited collections,
• a private label product.

Sublimation printing allows durable graphic reproduction on the outer layer of the fabric without giving up its essential functional properties.

In the product gallery, you will find sample projects, which can also be selected as patterns for printing.

View our graphic gallery and choose a pattern for your print

Material — polyester, elastane and TPU membrane

Softshell with a TPU membrane is a multi-layer technical fabric that combines a polyester surface with elastane and a technical membrane. Polyester allows sublimation printing, elastane provides flexibility and resistance to deformation, while the TPU membrane is responsible for moisture protection and supports breathability.

Key material features:

• width: 150 cm +/- 5 cm,
• weight: approximately 300 g/m²,
• composition: polyester + 6% elastane + TPU membrane,
• water resistance: WR > 8,000 H₂O,
• breathability: WVP > 3,000 g/m²/24h,
• flexibility,
• resistance to deformation,
• possibility of sublimation printing on the outer layer,
• good functional stability,
• suitable for outdoor, sports, workwear and promotional clothing.

Thanks to these parameters, the fabric works well in projects that need to combine technical functionality with an individual appearance.

Water resistance and weather protection

One of the most important features of softshell with a TPU membrane is its water resistance of WR > 8,000 H₂O. The fabric helps protect against rain, moisture and changing weather conditions, which makes it suitable for outdoor, workwear and sports clothing.

The key advantages in this area include:

• protection against moisture,
• greater comfort in changing weather,
• practical use in field clothing,
• a suitable choice for outdoor products,
• the possibility of use in corporate clothing for field workers,
• functionality in products exposed to rain and wind.

Softshell works well in products intended for work, travel, outdoor activities and everyday use in more demanding conditions.

Breathability and wearing comfort

The TPU membrane provides breathability at the level of WVP > 3,000 g/m²/24h, which is important for clothing intended for movement, work and physical activity. The fabric helps transport moisture to the outside, supporting wearing comfort.

Key functional advantages:

• breathability,
• comfort during activity,
• better moisture management,
• comfort in sports and outdoor clothing,
• practicality in field work,
• functionality during longer wear.

This makes softshell suitable for jackets, vests, hoodies and technical clothing elements that are intended not only for occasional use, but also for regular wear.

Flexibility and resistance to deformation

The 6% elastane content makes the fabric more flexible and more resistant to deformation than classic technical fabrics without elastic fibres. Softshell works better during movement, which is important for sports, outdoor and workwear clothing.

The fabric works well in products that should:

• provide freedom of movement,
• fit well on the body,
• work with the body during activity,
• retain its shape after use,
• provide comfort when worn in layers,
• maintain stability in the finished product.

Softshell flexibility is particularly important for jackets, vests, trousers, clothing for cyclists, runners, field workers and active users.

Weight of approximately 300 g/m²

The weight of approximately 300 g/m² provides a good balance between stability, protection and wearing comfort. The fabric is solid enough for technical applications, while remaining comfortable in clothing and accessories.

Fabric of this weight works well in products such as:

• softshell jackets,
• vests,
• technical hoodies,
• outdoor trousers,
• workwear,
• corporate clothing,
• outdoor accessories,
• bags and covers,
• premium promotional products,
• pet clothing and accessories.

It is a good choice for projects that should be functional, durable and visually attractive.

Applications of printed softshell

Softshell with a TPU membrane and sublimation print has a wide range of applications in the production of technical, outdoor, sports, promotional, workwear and functional clothing.

Example applications:

• outdoor jackets,
• corporate jackets,
• promotional jackets,
• vests,
• softshell hoodies,
• trekking trousers,
• clothing for runners,
• clothing for cyclists,
• clothing for climbers,
• workwear,
• field uniforms,
• event apparel,
• promotional clothing,
• bags,
• backpacks,
• cosmetic bags,
• covers,
• protective guards,
• bottle covers,
• protective clothing for dogs,
• dog vests,
• dog coats,
• waterproof pet accessories,
• private label products.

The fabric can be used both for short runs and prototypes, as well as for larger production orders.

Who is printed softshell for?

Softshell with a TPU membrane and sublimation print is suitable for:

• outdoor brands,
• sportswear manufacturers,
• workwear manufacturers,
• companies creating corporate clothing,
• advertising agencies,
• event organisers,
• online stores,
• sewing workshops,
• design studios,
• handmade brands,
• manufacturers of technical accessories,
• the pet industry,
• manufacturers of pet accessories,
• companies creating private label products.

It is a good solution for projects where water resistance, breathability, flexibility, durability, personalisation and a professional appearance of the finished product are important.

Sublimation printing

Printing on softshell is performed using sublimation technology on the outer layer of the fabric. This technology allows full-colour patterns, logos, advertising graphics and collection motifs to be applied while maintaining an aesthetic product appearance.

Main advantages of sublimation printing:

• possibility of producing full-colour graphics,
• good detail reproduction,
• possibility of printing logos, patterns and markings,
• possibility of printing repeat patterns,
• possibility of full-surface printing,
• aesthetic effect on a technical fabric,
• no thick print layer on the fabric surface,
• possibility of producing short and larger runs.

The final print effect depends on the quality of the supplied design, colour palette, production settings and material properties.

Product personalisation

Printed softshell works very well in personalised, corporate and technical products. The possibility of printing allows products to be created for a specific brand, team, company, advertising campaign or collection.

Possible forms of personalisation:

• logo print,
• company graphic print,
• outdoor pattern print,
• workwear marking print,
• collection motif print,
• seasonal pattern print,
• full-surface print,
• print adapted to a specific pattern layout.

This is particularly useful in the production of corporate clothing, event jackets, promotional vests, outdoor collections, pet products and technical accessories.

Care and use

To preserve the fabric parameters and graphic quality, careful care of finished products is recommended. Softshell with a TPU membrane should be used and washed according to its intended purpose and the requirements of the finished product construction.

Care recommendations:

• wash at a low temperature,
• use mild detergents,
• avoid fabric softeners,
• dry by hanging,
• do not iron directly on the printed side,
• avoid aggressive detergents,
• do not clean mechanically with sharp brushes.

Proper care helps maintain the membrane properties, print aesthetics and durability of the finished product.

Quality and repeatability

In the production of printed softshell, repeatability of colours, patterns and functional parameters is important. This is especially important for corporate clothing, outdoor collections, promotional products and larger production orders.

Possible quality control and production arrangements include:

• selection of printing technology,
• sample preparation,
• proof preparation,
• adjusting the graphic to the fabric width,
• adjusting the print to the cutting pattern,
• colour repeatability,
• preparation of product specifications,
• production of prototypes, short runs and larger series,
• verification of the material for the intended application.

For demanding projects, we recommend preparing a sample to check the colour, breathability, flexibility, fabric behaviour and final print effect.

Logistics and B2B cooperation

Softshell with a TPU membrane and print can be used for prototypes, short runs and larger production orders. Cooperation is possible with clothing brands, advertising companies, workwear manufacturers, outdoor brands, sewing workshops and brands creating private label products.

Cooperation options include:

• prototypes,
• short runs,
• corporate clothing,
• outdoor collections,
• personalised products,
• promotional products,
• larger orders,
• regular cooperation,
• support with file preparation,
• advice on material selection,
• adjusting the print to the cutting pattern,
• private label production.

This is a practical solution for companies that want to introduce technical clothing and accessories with custom printing and repeatable quality.

How to order printed softshell?

To prepare a quotation and adjust production to the project, it is best to send the basic order details.

The brief should include:

• planned use of the fabric,
• expected quantity,
• graphic design or design assumptions,
• colour information,
• how the fabric will be used in the finished product,
• requirements for water resistance, breathability and flexibility,
• information about the cutting pattern or graphic placement,
• sewing and finishing method of the product,
• expected production deadline.

Based on this information, we can prepare a recommendation, quotation, schedule and, if needed, a proof or sample.

Technical data

• product: softshell with TPU membrane and sublimation print,
• width: 150 cm +/- 5 cm,
• weight: approximately 300 g/m²,
• composition: polyester + 6% elastane + TPU membrane,
• water resistance: WR > 8,000 H₂O,
• breathability: WVP > 3,000 g/m²/24h,
• printing technology: sublimation on the outer layer,
• print: possibility of printing any customer-supplied artwork,
• functional features: flexible, waterproof, breathable, resistant to deformation, durable, technical,
• application: jackets, vests, hoodies, outdoor trousers, sportswear, workwear, corporate clothing, bags, covers, technical accessories, pet accessories,
• production: prototypes, short runs, larger orders,
• possibility of private label production,
• possible dimensional and colour differences: depending on the production process, material parameters and graphic design.

Key advantages of printed softshell

Custom print

The fabric can be printed with any customer-supplied artwork — from a simple logo to full-surface patterns, corporate graphics, outdoor designs and promotional prints.

Water resistance WR > 8,000 H₂O

The TPU membrane supports protection against moisture, rain and changing usage conditions.

Breathability WVP > 3,000 g/m²/24h

The fabric transports moisture to the outside, increasing comfort during activity, work and everyday use.

Flexibility thanks to 6% elastane

The fabric works well during movement, is resistant to deformation and comfortable in technical clothing.

Weight of approximately 300 g/m²

The weight provides stability, durability and suitable properties for outdoor, workwear and functional clothing.

Sublimation on the outer layer

The possibility of printing allows personalised clothing and accessories to be created without giving up the functionality of the fabric.

Private label product

Softshell can be used to produce jackets, vests, corporate clothing, outdoor products and technical accessories under your own brand.

How to prepare artwork for printing?

The graphic design should be prepared in good quality so that the print looks attractive on the outer layer of the softshell. For technical clothing, it is worth considering the cutting method, seam placement, pattern direction and the most visible areas of the finished product.

When preparing artwork, consider:

• fabric width: 150 cm +/- 5 cm,
• pattern scale,
• repeatability of the graphic,
• placement of elements on the cutting pattern,
• readability of the logo and small details,
• colour palette of the project,
• intended use of the finished product,
• sewing, folding and finishing areas,
• possibility of preparing a sample,
• maintaining appropriate graphic file quality.

The better the design is prepared, the better and more predictable the final print result will be.

Check our guidelines for preparing artwork

Samples and proof

For technical, outdoor and workwear projects, private label products, larger orders or projects requiring particular colour accuracy, we recommend preparing a proof or sample.

A sample allows you to check:

• colour palette,
• detail sharpness,
• appearance of the graphic on the softshell surface,
• fabric flexibility,
• fabric behaviour during sewing,
• matching the fabric to the planned product,
• functionality in the intended application,
• final effect of the finished product.

This is especially important for jackets, vests, corporate clothing, outdoor products, pet clothing and larger production runs.

Important production information

• the fabric width is 150 cm +/- 5 cm,
• the fabric weight is approximately 300 g/m²,
• the composition is based on polyester, 6% elastane and a TPU membrane,
• the fabric has water resistance WR > 8,000 H₂O,
• the fabric has breathability WVP > 3,000 g/m²/24h,
• any customer-supplied artwork can be printed,
• the print is made using sublimation technology on the outer layer,
• the fabric is flexible and resistant to deformation,
• print colours may differ slightly from the colours visible on screen,
• the softshell construction may affect the final appearance of the product,
• the final effect depends on the quality of the supplied graphic design,
• for demanding projects, we recommend preparing a proof or sample,
• actual functional parameters depend on the construction of the finished product and conditions of use,
• for larger orders or ongoing cooperation, terms can be agreed individually.

Frequently asked questions

Can you print my own artwork?

Yes. We can print any customer-supplied artwork, such as a logo, repeat pattern, outdoor graphic, company markings or full-surface apparel design.

What is the fabric width?

The fabric width is 150 cm +/- 5 cm.

What is the fabric weight?

The weight is approximately 300 g/m².

Is the fabric waterproof?

Yes. The fabric has water resistance WR > 8,000 H₂O.

Is the fabric breathable?

Yes. The breathability of the fabric is WVP > 3,000 g/m²/24h.

Is the fabric flexible?

Yes. The fabric contains 6% elastane, making it flexible and resistant to deformation.

Is softshell suitable for jackets?

Yes. The fabric works very well for jackets, vests, technical hoodies and outdoor clothing.

Is the fabric suitable for corporate clothing?

Yes. Printed softshell can be used for corporate jackets, vests, field uniforms and promotional clothing.

Is the fabric suitable for pet accessories?

Yes. It can be used for protective clothing, vests, dog coats, harnesses, collars and waterproof pet accessories, provided the parameters are matched to the specific application.

Does the fabric require special care?

Yes. Washing at a low temperature, mild detergents, no fabric softeners and drying by hanging are recommended.

Is it worth making a sample before production?

Yes. For projects requiring accurate colours, larger orders or technical applications, a sample is recommended because it allows you to check the final print effect and the behaviour of the fabric.